Oct 29, 2019
1. The acceptance of the automotive wiring harness is mainly the acceptance of the wire harness incoming material, and professional equipment can be used for testing and inspection;
2. Place the qualified wire on the transfer wire frame and feed the wire. At this time, you should pay attention to avoid scratching the surface of the wire;
3. Cut the wire to the required length and cut the insulation according to the requirements. The main equipment used is pneumatic peeling machine;
4. Use a twisting machine to finish and twist the conductor at the joint, and then use the terminal machine to rive the conductor and plug terminal at the joint;
5. After that, the assembled wire harness is assembled, mainly by assembling the plastic plug housing. It is also necessary to carry out post-testing of the product before it can be packaged.